NO LONGER AVAILABLE

9MM Mystic
Discontinued

For a modern offering of this suppressor check out the Mystic X here!

Goto the home page here.
Titanium /Stainless steel construction. Take Apart Multipurpose 9mm suppressor.

I have used many different cans on this host and the mystic is by far the quietest can I have ever shot on my 300blk AND ITS TAKE APART! – Chris B

We here at Liberty Suppressors listen when the masses speak.
You asked for a user serviceable 9mm can, we delivered.
You asked for a unit that is adaptable, we delivered.
You asked for an erosion and dip resistant baffle material, we delivered.
You asked for quiet…. We delivered that part too…..

Made entirely from Titanium and Stainless Steel, this suppressor weighs in at a little over 15 ounces with a recoil booster installed in it. This suppressor can be “dipped” ultrasonically, sand blasted, or soaked in harsh solvents without fear of damage to the unit.

Did I mention that is also full auto rated? Well it is!!!

We also decided to make it adaptable to other makers mounting devices as well, like the Multimount adapters as well as TROS boosters too. We also make an adapter ring to mount the Triad three lug mount to the Mystic as well. These features make this the perfect transition suppressor for sealed aluminium suppressor owners. Since all the mounts will work with the Mystic, this saves the end-user considerable money when it comes to buying mounts.

Designed with Dual Arc Baffle technology, the Mystic is incredibly quiet for a centerfire monolithic core suppressor as well. But the real treat is that the Mystic can also withstand several other centerfire rifle and handgun calibers as well. The 300 / 221 Fireball and the 300 BLK are prime examples of this. Not only in subsonic, but also in supersonic speeds. Also, the 38 Special/ 357 Magnum family work as well. Being take-down, this suppressor will be a favorite for using cast lead bullets. We all know that lead buildup in the 9mm suppressor is a reality.

Another point that was taken into consideration is that a lot of shooters that are looking into this type of suppressor are also shooting 22LR carbines and want to be able to use their 9mm suppressor on that platform as well. We tested the Mystic on 22LR and it sounds great in this application as well. Great sound combined with take-down clean-ability make this a winner here as well!!!

You guys have the best customer service I have ever experienced. From answering emails, following up after the question has been answered, and the ordering process. – James B

Available in one of four configurations:

1. No mount – you have the mounts you need already
2. Recoil booster for pistol use with suppressor
3. Fixed barrel mount for carbine use with suppressor
4. Adapter ring for Triad mount with suppressor

All of our mounts will also be available individually as well.

The minimum barrel length for supersonic blackout ammo is 8″

The Mystic is at home on this SIG P226 as well as carbines and bolt guns. Plan on spending a lot of money on ammo !!!!!

Due to the take-apart nature of the Mystic, 22LR carbines are no longer off limits to your 9mm suppressor!!! Here is the Mystic
on a couple of 22LR SBR applications for reference, we feel it is right at home on the Spikes Tactical AR upper with a free float
handguard.
Mystic Multipurpose Suppressor
MSRP: 750$

Weight of suppressor: Approximately 12.1 oz (module only)
Approximately 16 oz (with booster)

Length/Diameter : 8” x 1.375”

Material: Stainless steel / Titanium

Attachment: Multiple styles

Approx. DB Reduction: 38dB (This is with Fiocchi 158 gr 9mm which was showing 162dB unsuppressed)

Available in one of four configurations:
1. No mount – you have the mounts you need already
2. Recoil booster for pistol use with suppressor
3. Fixed barrel mount for carbine use with suppressor
4. Adapter ring for Triad mount with suppressor

All of our mounts will also be available individually as well.

The minimum barrel length for supersonic blackout ammo is 8″

Color

Tube color is  Matte Black.
The front cap on the suppressor is matte gray only as well as the tube lock ring.
The fixed barrel adapters are matte stainless.
The Triad mount is black anodized.
The recoil boosters come in matte black anodized (hardcoat) finish only.

Unsuppressed it measured 155 dB average with the lowest being 154.5dB and the highest being 155.5 dB

The Mystic averaged 126.6 dB
Highest shot : 128.5
Lowest: 125.5

Weight of suppressor: Approximately 12.1 oz (module only)
Approximately 16 oz (with booster)

Length/Diameter : 8” x 1.375”
Material: Stainless steel / Titanium
Attachment: Multiple styles

Approx. DB Reduction: 38dB (This is with Fiocchi 158 gr 9mm which was showing 162dB unsuppressed)

22 Hornet
22 K Hornet
218 Bee
223 REM – 16″ BBL
30 PPC – Subsonic
30 Carbine
32-20
357 MAG
221 Fireball
32 S&W Long
32 H&R Magnum
380
9X18
9X19 (Base Caliber)
38 Super
38 Special
38 S&W
357 Max – Subsonic
338 Spectre
300 BLK
300 Whisper
300/221
308 Win- Subsonic
all rimfire cartridges
5.45x39MM Russian
We now rate it for the 300 BLK in both supersonic and subsonic on an 8″ barrel
7.62 X 39 MM
FULL AUTO 300 BLACKOUT SUBSONIC AND SUPERSONIC.
6.8spc

Here is an example of the performance of the Mystic…

Host Weapon : SIG P226
Ammo : Fiocchi 147gr
Unsuppressed : 161dB
AVG Suppressed : 124.2 dB
dB Reduction : 36.8 dB

Note that these numbers were collected at our private range using a B&K 2209 sound level meter at 1 meter to the left of the muzzle.
16″ 300AAC BLK upper.
Remington 220gr BLK ammo

Temp: 75 degrees
Sunny and no wind

Unsuppressed it measured 155 dB average with the lowest being 154.5dB and the highest being 155.5 dB

The Mystic averaged 126.6 dB
Highest shot : 128.5
Lowest: 125.5

Mystic with core driver and no mount……………….$750
Mount price schedule listed below.

Additional Mystic Booster Pistons…………………$80
No need for a whole new booster to swap.

BATTLECLOTH POUCH INCLUDED IN EVERY PURCHASE

[message type=”warning”]
Special Note – AK
The mystic is rated for the 7.62 x 39 Russian cartridge as far as durability is concerned. We will not warranty baffle strikes resulting from the use of the mystic on an AK platform though as these guns are notorious for having threads that are not concentric. Also note, our test showed us that this can shoots loose OFTEN on the AK we used in our test. A loose silencer is almost guaranteed to generate baffle strikes. Check it often and be careful not to get burned as the unit will be several hundred degrees after just a single magazine of ammunition. Protective equipment to prevent burns is not optional ,but rather, mandatory for this setup.

Special Note – Bullet Instability
LIBERTY SUPPRESSORS DOES NOT WARRANTY THE USE OF 60 GRAIN AGUILA SSS SUBSONIC AMMO IN THEIR SUPPRESSORS, THIS IS DUE TO BULLET INSTABILITY

Special Note – 223
There has been a lot of interest in using this unit on 223 rifles as well as the intended caliber. It can be used on 223 under limited conditions. Low rates of fire with cooling periods and no mirage covers. The use of a mirage cover will hide the obvious indicator of the unit getting hot by producing mirage. This is a great indicator to let the shooter know that the can needs to cool off. Also, in 223 the barrel must be at least 16″ in length.

Special Note – AR15
INFORMATION FOR AR15’S W/ FREE FLOAT HAND GUARDS. THE MAX OD FOR LOCK RING ON MYSTIC IS 1.462

Special Note – Lock System

Liberty Suppressors builds a robust and reliable suppressor system with the Mystic platform. Sometimes however, we run across a brand of handguns, which have a lock system that includes a very critical timing sequence. On the rare occasion of running across these handguns, the Mystic is just heavy enough to prevent reliable cycling of these actions. We have found that most platforms work great, such as the full sized glocks, sig sauers, berrettas, S&W M&P series and Springfield XD series. Other guns MAY also work great but we do not have the facilities to test this suppressor with every possible handgun in the industry. We designed it around the Glock 17 chassis and it works the best with this handgun. Other handguns work well also, but the engineering was based on the glock system. Please understand that we will do everything we can to help you to get your gun to work with the Mystic, but sometimes, a different handgun is the only answer. Feel free to give us a call for any questions regarding this issue, or make an appointment to come by and try out the Mystic for yourself. We are sure you will be pleased.

Thank you for understanding.

[/message]

This Mystic is my second Liberty suppressors, this suppressor is awesome.  Your products are top notch and the folks that make them and take care of customers are even more top notch.  You have a customer for life!!! – Walter C.

Mystic adapters can be purchased directly from our Web Store! Click here to see selection!

Introducing the FBA ( Fixed Barrel Adapter) Thread protector. This is a thread protector designed for the fixed barrel adapters that we offer for the Mystic and Infiniti sound suppressors. This unit is designed in such a way as to help reduce flash somewhat, but it is primarily done as a protective device to cover the existing threads on the FBA that is left on the gun. Some builds are done where the FBA is attached to the barrel , underneath a handguard for instance, and then the silencer is screwed onto this adapter. The FBA is brought to the leading edge of the handguard and the threads of the FBA are exposed when the silencer is not installed. This leaves the threads exposed and prone to possible damage from aggressive training, accidental damage from mishandling of the firearm or combative situations. The thread protector gives an aggressive covering of those threads as well as makes the end of the barrel look more “complete” when the silencer is not installed. This device is made from the same 300 series stainless steel as the FBA units themselves so the color is a perfect match.

EFFECTIVE IMMEDIATELY: DUE TO INCONSISTENCY IN CONCENTRICITY WITH MULTI MOUNT ADAPTERS FROM GEMTECH, WE CAN NO LONGER RECOMMEND OR WARRANTY THE USE OF THEM WITH LIBERTY SUPPRESSORS.

Multimount is a registered trademark of Gemtech Triad is a registered trademark of Advanced Armament Corporation