NO LONGER AVAILABLE – Freedom Mag
Stainless / Titanium construction
The Freedom Suppressor is the result of ongoing research and development here at Liberty Suppressors. This suppressor uses the innovative square bore technology that we developed for our Pandora line of suppressors. The suppressor mounts via a traditional thread mounting scheme for better accuracy and repeatability as well. This suppressor produces world class suppression in excess of 31dB* and is lighter weight than most suppressors in the same class.
I would like to THANK YOU for making a superior line of suppressors. I currently own a LIBERTY FREEDOM MAG and love it. I use it primarily for hearing protection for hunting applications. I would like to thank you for taking a stand in supporting our rights as law abiding citizens. – Dan Widmaier
NEW ORDERS NOW COME WITH A LIBERTY MIRAGE SHIELD
RATED FOR 300 WIN MAG AND DOWN. EXCEPT FOR RIMFIRE CARTRIDGES.
Length : 11″
Diameter : 1.5″
Material : Stainless Steel / Titanium
Weight : Approximately 22.5 ounces
Avg. Suppression : 33 DB
Mounting : 5/8 -24 Thread Mount
16″ 300AAC BLK upper.
Remington 220gr BLK ammo
Temp: 75 degrees
Sunny and no wind
Unsuppressed it measured 155 dB
average with the lowest being 154.5dB
and the highest being 155.5 dB
The Freedom averaged 121.7 dB
Highest shot: 123.2
[message type=”warning”]This suppressor is rated up to 300 WinMag. They are not rated for anything in the Weatherby family, nor are they rated for anything in the R.U.M. family either. [/message]
They can be had in various thread pitches but comes in 5/8-24 as the normal
*dB information derived from a B&K 2209 sound meter 1 meter to the left
and 1.6 meters above grade with 150 gr. Federal American Eagle 308 WIN
ammunition, being fired from a Remington 700 with a 22″ barrel.
FREEDOM COUPLING �
5/8-24 TO 1/2-28 ADAPTERS